{"product_id":"bambu-lab-filament-paht-cf-2","title":"Bambu Lab PAHT CF","description":"\u003ch2 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003eBambu Lab PAHT-CF Filament — 1.75 mm, 1 kg\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003ePAHT-CF stands for \u003cem\u003ePolyamide High Temperature — Carbon Fibre\u003c\/em\u003e. It's a PA12 nylon base loaded with chopped carbon fibre, and it sits at the serious end of Bambu Lab's engineering range. Where standard nylon soaks up moisture from the air and turns brittle and stringy, PA12 absorbs roughly half as much — so PAHT-CF keeps its mechanical properties and dimensional stability far better in humid conditions, which matters a great deal in an Australian workshop. The carbon fibre adds stiffness and reduces warping, and the whole composite stays strong and rigid at temperatures that would leave a PLA part sagging on a shelf.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eThis is a material for functional parts rather than display pieces: drone and RC frames, jigs and fixtures that live near heat, under-bonnet and engine-bay brackets, tooling, robot arms and end effectors, gears and bushings, and replacement machine components that need to survive real loads. It's aimed at makers, small manufacturers, engineering workshops and TAFE or university labs — not a first-week beginner filament, but very approachable if you've already printed ABS or ASA successfully.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eKey Features\u003c\/h3\u003e\n\u003cp style=\"line-height:2.6\"\u003e\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eCarbon-fibre reinforced PA12\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh heat resistance\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e~50% lower water absorption than standard PA-CF\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh stiffness \u0026amp; strength\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eLow warping\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e±0.03 mm tolerance\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eAMS \u0026amp; RFID compatible\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eMatte technical finish\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eLike all Bambu Lab spools, PAHT-CF carries an RFID tag, so an X1, P1 or H2 series printer with an AMS reads the material type and colour automatically and loads the tuned profile for you — no guessing at settings for you.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003ePrint Settings\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif;line-height:1.8;padding-left:20px\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 260–300 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 100–120 °C on both Smooth PEI and Textured PEI plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e under 100 mm\/s — pushing harder hurts layer bonding on this material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling fan:\u003c\/strong\u003e 0–40% only; too much cooling will delaminate your part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle hardware:\u003c\/strong\u003e hardened steel is essential — carbon fibre will wear out a brass nozzle quickly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e strongly recommended. A stable, warm chamber keeps large parts flat and improves layer adhesion at these temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin:22px 0 12px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-family:'Open Sans',sans-serif;font-size:0.97em\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;width:45%\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003ePAHT-CF (carbon-fibre reinforced PA12 nylon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eSpool Weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 kg (filament with spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003ePrint Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e260–300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eBed Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e100–120 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e±0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDrying\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e80 °C for 8–12 h (drying oven), or 90–100 °C for 12 h on an X1 series heatbed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eColours Available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 — Black (70100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin:22px 0 12px\"\u003eAvailable Colours\u003c\/h3\u003e\n\u003cp style=\"line-height:2.4\"\u003e\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e⬤  Black (70100)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7;font-size:0.95em\"\u003ePAHT-CF is offered in a single technical black — the carbon fibre content gives it a subtle matte, slightly speckled finish that hides layer lines well on functional parts.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003ePractical Tips\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eDry it before every print, without exception.\u003c\/strong\u003e Even though PA12 absorbs less moisture than ordinary nylon, PAHT-CF is still hygroscopic and a damp spool is the single most common cause of disappointing results — you'll see popping and steam at the nozzle, furry stringing, poor layer adhesion and brittle parts. Dry at 80 °C for 8–12 hours in a filament dryer or oven, and print straight from a dry box if you can. Between prints, seal the spool in an airtight container with fresh desiccant rather than leaving it on the printer.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eSet the machine up for abrasive material first.\u003c\/strong\u003e Fit a hardened steel nozzle before you load this spool — a brass one can wear noticeably within a single large print, and a worn nozzle quietly ruins dimensional accuracy long before it fails outright. Keep the part cooling fan low, slow the first layer down, and give tall or wide parts an enclosed, draught-free chamber. Because carbon fibre makes the material stiff, avoid tight filament path bends and let the spool unwind freely.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003cdiv style=\"background:#f7f8ff;border-left:4px solid #020873;border-radius:4px;padding:18px 22px;font-family:'Open Sans',sans-serif\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/div\u003e\n","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":53525443412257,"sku":"BAMBU-LAB-FILAMENT-PAHT-CF-1","price":76.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/87306f3e061c4c0d90d7783cdc63d0cf.png?v=1789742586","url":"https:\/\/ne3dprinting.myshopify.com\/products\/bambu-lab-filament-paht-cf-2","provider":"NE3D Printing","version":"1.0","type":"link"}