{"title":"Support \u0026 PVA","description":"Support Filament: Clean Overhangs and Complex Geometries.\r\n\r\nMeet the materials that make difficult prints possible: dedicated support filaments — soluble or breakaway — work with dual extrusion and multi-material setups to give you clean results on overhangs and internal cavities. Options for PLA, PETG, ABS and PA\/PET.","products":[{"product_id":"bambu-lab-filament-pva","title":"Bambu Lab PVA","description":"\u003ch2 style=\"font-family:Poppins, sans-serif;color:#020873;margin:0 0 12px\"\u003eBambu Lab PVA Water-Soluble Support Filament\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans', sans-serif;color:#001A33;line-height:1.7\"\u003ePVA (polyvinyl alcohol) isn't a filament you print models from — it's the filament that makes difficult models possible. Printed as support material alongside PLA or PETG, it holds up overhangs, bridges, internal channels and captive moving parts, then dissolves completely in water when the print comes off the plate. No flush cutters, no scarred surfaces, no giving up on a geometry because you can't reach inside it to clean it up.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans', sans-serif;color:#001A33;line-height:1.7\"\u003eIt's the natural next step for makers running a multi-material setup: articulated models and print-in-place mechanisms, drone and RC parts with enclosed cavities, engineering prototypes with internal cooling channels, lattice and organic shapes, and school or workshop projects where hand-removing supports isn't practical. Bambu Lab embeds all printing parameters in the spool's RFID tag, so an AMS or AMS lite reads the profile automatically — but any 1.75mm printer with multi-material capability can run it with the settings below.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins, sans-serif;color:#020873;margin:0 0 14px\"\u003eKey Features\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 18px;line-height:2.4\"\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eDissolves in water\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eSmooth support interface\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eRecommended for PLA \u0026amp; PETG\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eAMS \u0026amp; AMS lite compatible\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eRFID auto-settings\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e±0.03mm tolerance\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eReusable high-temp spool\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cul style=\"font-family:'Open Sans', sans-serif;color:#001A33;line-height:1.7;padding-left:20px\"\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eClean release, strong bond.\u003c\/strong\u003e The support interface sticks well enough to hold geometry mid-print, then washes away without leaving the rough, pitted underside you get from breakaway supports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eReaches where tools can't.\u003c\/strong\u003e Enclosed voids, threaded holes, hinges and lattices all clean up in a water bath rather than under a hobby knife.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eConsistent feeding.\u003c\/strong\u003e 1.75mm ±0.03mm on a high-temperature reusable spool keeps AMS feeding predictable across long multi-material jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins, sans-serif;color:#020873;margin:0 0 12px\"\u003ePrint Settings\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans', sans-serif;color:#001A33;line-height:1.7;padding-left:20px\"\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eNozzle temperature:\u003c\/strong\u003e 220–250°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eBed temperature:\u003c\/strong\u003e 35–45°C (use glue stick on the plate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003ePrint speed:\u003c\/strong\u003e under 200 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eCooling fan:\u003c\/strong\u003e on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eDrying before use:\u003c\/strong\u003e 80°C for 12 hours in a blast drying oven or filament dryer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eUse with:\u003c\/strong\u003e PLA and PETG models — set PVA as the support and support-interface material in your slicer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins, sans-serif;color:#020873;margin:0 0 12px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-family:'Open Sans', sans-serif;color:#001A33\"\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873;width:45%\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003ePVA (water-soluble support)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eSpool Weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e500g net, reusable high-temp spool with RFID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003ePrint Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e220–250°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eBed Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e35–45°C (with glue)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e±0.03mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eDrying\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e80°C for 12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eCompatibility\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003eAMS \u0026amp; AMS lite (dry filament only); any 1.75mm multi-material printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eColours Available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 — Clear (66400)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins, sans-serif;color:#020873;margin:0 0 12px\"\u003eAvailable Colours\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 8px\"\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eClear (66400)\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans', sans-serif;color:#001A33;line-height:1.7\"\u003ePVA is a support material, so it's supplied in a single natural clear shade — the finished look of your part comes from the PLA or PETG you pair it with.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins, sans-serif;color:#020873;margin:0 0 12px\"\u003ePractical Tips\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans', sans-serif;color:#001A33;line-height:1.7\"\u003e\u003cstrong style=\"color:#020873\"\u003eKeep it bone dry.\u003c\/strong\u003e PVA is the most moisture-hungry filament most people will ever run — it pulls water straight out of humid Australian air, and damp PVA jams, bubbles and strings badly. Dry it at 80°C for 12 hours before the first print, keep it in a sealed box with fresh desiccant between jobs, and run it from a dry AMS or a heated dryer rather than leaving it on an open shelf overnight.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans', sans-serif;color:#001A33;line-height:1.7\"\u003e\u003cstrong style=\"color:#020873\"\u003eDissolving works best with patience.\u003c\/strong\u003e Soak the finished print in warm (not boiling) water and let it sit — a few hours for thin interface layers, overnight for dense internal supports. Gently agitating the water or swapping it once speeds things up. Don't pour heavily saturated PVA water down the drain in a hard-water area; let it dilute well or dispose of it with your general waste water.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003cdiv style=\"background:#f7f8ff;border-left:4px solid #020873;border-radius:4px;padding:18px 22px;font-family:'Open Sans', sans-serif;color:#001A33\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/div\u003e\n","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":53525443674401,"sku":"BAMBU-LAB-FILAMENT-PVA","price":61.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/5c9ec787a5644749995eacec0f6fe0ce.jpg?v=1789742591"},{"product_id":"bambu-lab-support-for-pla","title":"Bambu Lab Support For PLA","description":"\u003ch2 style=\"font-family:Poppins,sans-serif; color:#020873; margin-bottom:12px;\"\u003eBambu Lab Support for PLA — Supports That Peel Off Clean\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7;\"\u003eSupport material is the one part of a print you throw away, so it should come off without a fight. Bambu Lab \u003cstrong\u003eSupport for PLA\u003c\/strong\u003e (also sold as Support for PLA\/PETG) is a specially formulated breakaway filament that deliberately \u003cem\u003edoesn't\u003c\/em\u003e bond well to PLA or PETG. The polarity difference between the support layer and your model means the interface stays weak — you snap the support away by hand or with pliers and the surface underneath is left smooth and unmarked.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7;\"\u003eIt's the right pick for anyone printing steep overhangs, deep undercuts, articulated joints, miniatures, cosplay props, functional brackets or engineering prototypes where the underside actually matters. Because it prints in the same temperature window as PLA, it slots straight into a multi-material workflow on an AMS or AMS lite without any chamber or profile gymnastics — and it works just as well fed manually on a single-extruder machine for a dedicated support-interface swap.\u003c\/p\u003e\n\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\n\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin-bottom:14px;\"\u003eKey Features\u003c\/h3\u003e\n\u003cp style=\"line-height:2.6;\"\u003e\n  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eTool-free breakaway removal\u003c\/span\u003e\n  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eWorks with PLA \u003cem\u003eand\u003c\/em\u003e PETG\u003c\/span\u003e\n  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eRFID auto-recognition\u003c\/span\u003e\n  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eAMS \u0026amp; AMS lite compatible\u003c\/span\u003e\n  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003ePLA-range temperatures\u003c\/span\u003e\n  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eNo scarring on model surfaces\u003c\/span\u003e\n  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eInterface-only use stretches a spool\u003c\/span\u003e\n  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003e2 colours\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7; padding-left:20px;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesigned to fail — on purpose.\u003c\/strong\u003e The blend is tuned so the bond between support and model is just strong enough to hold during printing and weak enough to break by hand afterwards.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne spool covers two materials.\u003c\/strong\u003e No need to stock separate PLA and PETG support filaments — the same roll handles both.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBambu Lab printer compatibility.\u003c\/strong\u003e Suits X1 series, P1 series, P2S, A1 and A1 mini, all AMS units, all standard build plates and all nozzle sizes. Also prints on most third-party FDM machines that run 1.75 mm PLA.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColour choice for visibility.\u003c\/strong\u003e Nature gives you an obvious contrast against coloured models; Black hides any trace residue on dark prints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\n\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin-bottom:12px;\"\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7; padding-left:20px;\"\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 190–220 °C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 35–60 °C (use glue stick at the higher end)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e [VERIFY] — match your PLA profile; the Bambu Studio preset handles this automatically\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e [VERIFY] — PLA-style part cooling is the safe default\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrying (if it has absorbed moisture):\u003c\/strong\u003e 75 °C for 8 hours in a blast drying oven\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlicer setup:\u003c\/strong\u003e in Bambu Studio, set this filament as the \u003cem\u003eSupport\/Raft Interface\u003c\/em\u003e material and print the support body in ordinary PLA — you only need the specialty material on the contact layers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBest-practice values:\u003c\/strong\u003e 0 mm top interface spacing and 0 mm Z-distance give the cleanest underside finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\n\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin-bottom:12px;\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; font-family:'Open Sans',sans-serif; color:#001A33; font-size:0.95em;\"\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; width:45%;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003eSupport for PLA (breakaway support, also suits PETG)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003eBambu Lab\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e[VERIFY]\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eSpool Weight (net filament)\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e500 g, supplied on a spool\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003ePrint Temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e190–220 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eBed Temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e35–60 °C (with glue)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e1.28 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e185 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eDrying\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e75 °C for 8 h (blast drying oven)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eStorage Humidity\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e\u0026lt; 20% RH, sealed with desiccant\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eAMS Compatible\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003eYes — RFID auto-recognition\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eColours Available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e2 — Nature (65102), Black (65103)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\n\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin-bottom:14px;\"\u003eAvailable Colours\u003c\/h3\u003e\n\u003cp style=\"line-height:2.6;\"\u003e\n  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eNature \u003cspan style=\"color:#2B4CB9;\"\u003e(65102)\u003c\/span\u003e\u003c\/span\u003e\n  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eBlack \u003cspan style=\"color:#2B4CB9;\"\u003e(65103)\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7;\"\u003eBoth colours share identical specifications and print settings — pick whichever contrasts best with the models you print most. Select your colour from the dropdown above before adding to cart.\u003c\/p\u003e\n\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\n\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin-bottom:12px;\"\u003ePractical Tips\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7;\"\u003e\u003cstrong\u003eUse it as an interface, not as the whole support.\u003c\/strong\u003e The most common mistake is slicing the entire support structure in this material — expensive and unnecessary. Set it as the \u003cem\u003eSupport\/Raft Interface\u003c\/em\u003e only and print the bulk of the support in cheap PLA. A 500 g spool then lasts an extraordinarily long time, and you still get the same clean release.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7;\"\u003e\u003cstrong\u003eKeep it dry, and don't over-tune the gap.\u003c\/strong\u003e Like PLA, this material picks up moisture from the air — store it sealed with desiccant below 20% RH, and if you start seeing stringing or popping, dry it before blaming your settings. If supports are clinging too hard, check that you haven't increased the Z-distance: with this filament the intended setup is 0 mm spacing and 0 mm Z-distance, because the chemistry does the separating, not an air gap.\u003c\/p\u003e\n\n\u003cdiv style=\"background:#f7f8ff; border-left:4px solid #020873; border-radius:4px; padding:18px 22px; font-family:'Open Sans',sans-serif; color:#001A33; margin-top:24px;\"\u003e\n  \u003cstrong\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/strong\u003e\n\u003c\/div\u003e","brand":"Bambu Lab","offers":[{"title":"Nature (65102)","offer_id":53666017575201,"sku":"BAMBU-LAB-FILAMENT-SUPPORT-FOR-PLA-1-NATURE-65102","price":53.99,"currency_code":"AUD","in_stock":true},{"title":"Black (65103)","offer_id":53666017607969,"sku":"BAMBU-LAB-FILAMENT-SUPPORT-FOR-PLA-1-BLACK-65103","price":53.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/e4b1ce6d565d4362b6bf62facbca97e8.jpg?v=1790951613"},{"product_id":"bambu-lab-support-for-pla-petg","title":"Bambu Lab Support For PLA\/PETG","description":"\u003ch2 style=\"font-family:Poppins,sans-serif; color:#020873; margin-bottom:10px;\"\u003eBambu Lab Support for PLA\/PETG Filament\u003c\/h2\u003e\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7;\"\u003eOverhangs, bridges and internal cavities are where good prints usually go wrong — not because the model fails, but because removing the supports wrecks the surface underneath. Bambu Lab Support for PLA\/PETG solves that with chemistry rather than force. Its polarity differs from standard PLA and PETG, so the two materials sit against each other without ever properly bonding. The support holds its shape while printing, then snaps away by hand, leaving the finished face intact.\u003c\/p\u003e\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7;\"\u003eThis is a multi-material filament, so you'll need an AMS, AMS lite or AMS 2 Pro (or a manual filament swap) to run it alongside your model material. It suits anyone printing articulated models, figurines, functional brackets with steep overhangs, architectural work, or classroom projects where students shouldn't be attacking prints with a knife. It's a specialist consumable — used for interface layers only, a single 0.5kg spool lasts a very long time.\u003c\/p\u003e\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin-bottom:14px;\"\u003eKey Features\u003c\/h3\u003e\u003cp style=\"line-height:2.6;\"\u003e\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eTool-free break-away removal\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eWorks with PLA \u0026amp; PETG\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eProtects surface finish\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eRFID auto-detection\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eAMS compatible\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eReusable high-temp spool\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eLow 190°C print temp\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7;\"\u003eNote that this is a \u003cstrong\u003ebreak-away\u003c\/strong\u003e support, not a dissolvable one — it is water-insoluble and comes away mechanically. That's an advantage for most makers: no wash tank, no drying cycle, no waiting overnight for a part to release.\u003c\/p\u003e\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin-bottom:10px;\"\u003ePrint Settings\u003c\/h3\u003e\u003cul style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.8; padding-left:20px;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 190–220°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 35–60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e under 100 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e part cooling fan on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 75°C for 8 hours if the spool has absorbed moisture\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7;\"\u003eIn Bambu Studio or Orca, assign this filament to the \u003cem\u003esupport interface\u003c\/em\u003e only and leave the support body in your model material. You get the clean release where it matters and use a fraction of the spool doing it.\u003c\/p\u003e\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin-bottom:10px;\"\u003eSpecifications\u003c\/h3\u003e\u003ctable style=\"width:100%; border-collapse:collapse; font-family:'Open Sans',sans-serif; color:#001A33;\"\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003eSupport for PLA\/PETG (break-away)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e±0.05mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eSpool Weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e0.5kg net (with reusable spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003ePrint Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e190–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eBed Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e35–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003ePrint Speed\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e\u0026lt; 100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eDrying\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e75°C \/ 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eColours Available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e2 — Nature, Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin-bottom:14px;\"\u003eAvailable Colours\u003c\/h3\u003e\u003cp style=\"line-height:2.6;\"\u003e\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eNature (65102)\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eBlack (65103)\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7;\"\u003eBoth colours share identical specifications and print settings. Choose Nature as the general-purpose default, or Black when you want a clear visual line between support and model on light-coloured prints — it makes the interface much easier to spot during removal.\u003c\/p\u003e\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin-bottom:10px;\"\u003eTips From Our Workshop\u003c\/h3\u003e\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7;\"\u003eAvoid setting this material as the base or raft layer under tree supports — because it deliberately resists bonding, tree structures printed on a support-material base can work loose mid-print. Keep it on the interface layers and let your model material carry the structure below.\u003c\/p\u003e\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.7;\"\u003eLike all Bambu filaments this one is hygroscopic. Store it sealed with desiccant at under 20% RH between jobs. If your supports start printing stringy or the interface stops releasing cleanly, moisture is almost always the cause — dry the spool at 75°C for 8 hours and it'll come back.\u003c\/p\u003e\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\u003cdiv style=\"background:#f7f8ff; border-left:4px solid #020873; border-radius:4px; padding:18px 22px; font-family:'Open Sans',sans-serif; color:#001A33;\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/div\u003e","brand":"Bambu Lab","offers":[{"title":"Nature (65102)","offer_id":53666019082529,"sku":"BAMBU-LAB-FILAMENT-SUPPORT-FOR-PLAPETG-2-NATURE-65102","price":53.99,"currency_code":"AUD","in_stock":true},{"title":"Black (65103)","offer_id":53666019115297,"sku":"BAMBU-LAB-FILAMENT-SUPPORT-FOR-PLAPETG-2-BLACK-65103","price":53.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/e4b1ce6d565d4362b6bf62facbca97e8_5b523c9f-1f5c-43ca-8340-e2c55a5bc6bd.jpg?v=1790951625"},{"product_id":"bambu-lab-support-for-abs","title":"Bambu Lab Support For ABS","description":"\u003ch2 style=\"font-family:Poppins,sans-serif; color:#020873; margin:0 0 14px; font-size:1.6em;\"\u003eBambu Lab Support for ABS Filament — 1.75 mm, 0.5 kg\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.75; margin:0 0 14px;\"\u003ePrinting ABS or ASA is the easy part — getting the supports off without gouging the part underneath is where good prints go bad. \u003cstrong\u003eBambu Lab Support for ABS\u003c\/strong\u003e is a HIPS (high-impact polystyrene) support filament formulated to bond \u003cem\u003ejust enough\u003c\/em\u003e to ABS and ASA to hold overhangs in place, then release cleanly when you flex it away by hand. Because HIPS extrudes in the same temperature window as ABS, you can pair the two in one multi-material print without settling for compromise settings on either material.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.75; margin:0 0 14px;\"\u003eIt's a natural fit for anyone running engineering materials in an enclosed machine: functional ABS brackets with deep overhangs, ASA housings and outdoor enclosures, workshop jigs and fixtures, and classroom or prototyping parts where a clean underside matters more than an hour with sandpaper. Hobbyists, schools and small manufacturers all get the same payoff — less post-processing, and a surface finish you don't have to apologise for.\u003c\/p\u003e\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin:0 0 14px; font-size:1.25em;\"\u003eKey features\u003c\/h3\u003e\n\u003cdiv style=\"display:flex; flex-wrap:wrap; gap:10px; margin:0 0 16px;\"\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eHIPS breakaway support\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eScar-free interface finish\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eMatched to ABS \u0026amp; ASA temps\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eAMS compatible\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eNo solvents required\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eHeat-resistant PC+ABS spool\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.75; padding-left:20px; margin:0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeels, doesn't fight you.\u003c\/strong\u003e Tuned adhesion means supports stay put during the print and snap away afterwards — no pliers, no dissolving bath, no chewed-up overhangs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for zero-gap interfaces.\u003c\/strong\u003e Because it releases so predictably, you can run a 0 top Z distance and 0 interface spacing for sharper detail on downward-facing surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne material window.\u003c\/strong\u003e HIPS prints at 240–270 °C alongside ABS, so the hot end never has to swing between incompatible temperatures mid-print.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAMS ready.\u003c\/strong\u003e Fully compatible with Bambu Lab AMS systems for automated multi-material printing on X1, P1 and H2 series machines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks with any 1.75 mm printer.\u003c\/strong\u003e An enclosed, heated-chamber machine is strongly recommended — not for the support itself, but because the ABS or ASA it partners with needs the warm chamber to avoid warping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin:0 0 14px; font-size:1.25em;\"\u003eRecommended print settings\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.75; padding-left:20px; margin:0 0 12px;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 240–270 °C (start at 250 °C and match it to the ABS you're pairing it with)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 80–100 °C on a Cool Plate, High Temperature Plate or Textured PEI Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed preparation:\u003c\/strong\u003e a thin layer of glue stick — this is recommended by Bambu Lab, not optional\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e under 100 mm\/s — supports don't benefit from speed, and slower gives cleaner interfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling fan:\u003c\/strong\u003e on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber temperature:\u003c\/strong\u003e 25–45 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle sizes:\u003c\/strong\u003e 0.4, 0.6 or 0.8 mm — a standard brass nozzle is fine, no hardened nozzle needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetraction:\u003c\/strong\u003e 0.6–1.0 mm at 20–40 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeometry limits:\u003c\/strong\u003e max overhang angle 55°, max bridging length 30 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin:0 0 14px; font-size:1.25em;\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; font-family:'Open Sans',sans-serif; color:#001A33; font-size:0.95em;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; width:42%;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003eHIPS support filament (for ABS \u0026amp; ASA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eSpool Weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e0.5 kg net filament weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003ePrint Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e240–270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eBed Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e80–100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e[VERIFY]\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eColour\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003eWhite (66100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e1.16 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eSpool Material \u0026amp; Size\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003ePC+ABS, heat resistant to 90 °C · 200 mm diameter × 67 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eDrying Before Printing\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003eBlast drying oven 80 °C for 4 h, or X1 series heatbed 85–95 °C for 6 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003ePrint Speed\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e\u0026lt; 100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600;\"\u003eStorage Humidity\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e\u0026lt; 20% RH, sealed with desiccant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif; color:#020873; margin:0 0 14px; font-size:1.25em;\"\u003ePractical tips\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.75; margin:0 0 12px;\"\u003e\u003cstrong\u003eDry it before you trust it.\u003c\/strong\u003e HIPS picks up moisture from the air, and damp support material is the usual culprit behind stringy, crumbly interfaces that tear instead of peeling. Give it 4 hours at 80 °C in a filament dryer before a long print, and store it sealed with desiccant below 20% RH between jobs — Australian humidity, particularly through a coastal summer, will undo a good spool faster than most people expect.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif; color:#001A33; line-height:1.75; margin:0;\"\u003e\u003cstrong\u003eMake the spool go further.\u003c\/strong\u003e At 0.5 kg you don't want to waste it on bulk structure. In Bambu Studio, set the support \u003cem\u003einterface\u003c\/em\u003e to Support for ABS and leave the support body in your cheaper base material — you get the clean release where it counts and use a fraction of the spool. And don't skip the glue stick on the plate: it's a specified part of the process here, not just insurance.\u003c\/p\u003e\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\u003cdiv style=\"background:#f7f8ff; border-left:4px solid #020873; border-radius:4px; padding:18px 22px; font-family:'Open Sans',sans-serif; color:#001A33;\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/div\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":53666021409057,"sku":"BAMBU-LAB-FILAMENT-SUPPORT-FOR-ABS-1","price":22.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/1d30c545c5324a91a1ec30f0cb9f9a5b.png?v=1790951639"}],"url":"https:\/\/ne3dprinting.myshopify.com\/collections\/support.oembed","provider":"NE3D Printing","version":"1.0","type":"link"}