{"title":"PA\/Nylon","description":"PA \/ Nylon Filament: Strength and Wear Resistance for Demanding Parts.\r\n\r\nMeet the engineering workhorse: nylon and polyamide filaments deliver high strength, toughness and wear resistance for gears, bushings and functional components. Available in carbon-fibre and glass-filled grades — store dry and print in an enclosure for best results.","products":[{"product_id":"bambu-lab-filament-pa6-gf-2","title":"Bambu Lab PA6 GF","description":"\u003ch2 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003eBambu Lab PA6-GF Glass-Fibre Nylon Filament — 1.75 mm, 1 kg\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003ePA6-GF is Bambu Lab's glass-fibre reinforced nylon 6 — an engineering filament for the jobs PLA and PETG quietly fail at. The chopped glass fibre dispersed through the PA6 matrix lifts stiffness and dimensional stability well above unfilled nylon while keeping nylon's standout traits: toughness, self-lubricating low friction and genuine heat resistance, with a heat deflection temperature of 186 °C. It also prints far more predictably than plain PA6, because the fibre reinforcement dramatically reduces the warping and shrinkage that make raw nylon frustrating.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eThis is the material for end-use functional parts: gears and bushings, drone and RC frames, tooling and workshop jigs, motor mounts, brackets, hinges and under-bonnet automotive components. It's well suited to enclosed printers such as the Bambu Lab X1 series, P1S, P2S and H2 series, and works on any 1.75 mm FDM printer that can reach 290 °C at the nozzle and hold a warm chamber. Because glass fibre is abrasive, a \u003cstrong\u003ehardened steel nozzle in 0.4 mm or larger is mandatory\u003c\/strong\u003e — a 0.6 mm hardened nozzle is the sweet spot for flow and part strength. Standard brass or stainless steel nozzles will wear out quickly.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:14px\"\u003eKey Features\u003c\/h3\u003e\n\u003cp style=\"line-height:2.4;font-family:'Open Sans',sans-serif\"\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eGlass-fibre reinforced PA6\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e186 °C heat deflection\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh stiffness \u0026amp; impact strength\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eLow friction, wear resistant\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eLow warp for a nylon\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e±0.03 mm tolerance\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eRFID auto-recognition\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eAMS compatible\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e8 colours\u003c\/span\u003e\n\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003ePrint Settings Guidance\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif;line-height:1.8;padding-left:20px\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 260–290 °C — start at 280 °C and tune for layer adhesion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 80–100 °C, with glue stick on a smooth PEI or engineering plate for adhesion and easy release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e up to 130 mm\/s; slower outer walls give cleaner surfaces on fibre-filled material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling:\u003c\/strong\u003e keep it low — nylon relies on slow cooling for interlayer strength. Exact fan percentage: [VERIFY]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber:\u003c\/strong\u003e enclosed printer recommended; a warm chamber reduces warping on tall parts. Recommended chamber temperature: [VERIFY]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e hardened steel, 0.4 mm minimum (0.6 mm recommended). Not suitable for brass or stainless steel nozzles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying before use:\u003c\/strong\u003e 80 °C for 8–12 hours in a blast drying oven, or 90–100 °C for 10–12 hours on a heat bed. Never exceed 100 °C — the spool can deform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-family:'Open Sans',sans-serif;font-size:0.95em\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;width:42%\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003ePA6-GF (glass-fibre reinforced nylon 6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e±0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eSpool Weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 kg (filament with spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003ePrint Temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e260–290 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eBed Temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e80–100 °C (use glue)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eMax Print Speed\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e\u0026lt; 130 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.09 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eHeat Deflection Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e186 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDrying\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e80 °C for 8–12 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eNozzle Required\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003eHardened steel, 0.4 mm or larger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eColours Available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:14px\"\u003eAvailable Colours\u003c\/h3\u003e\n\u003cp style=\"line-height:2.4;font-family:'Open Sans',sans-serif\"\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eBlue (72600)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eOrange (72200)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eYellow (72400)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eLime (72500)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eBrown (72800)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eWhite (72102)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eGray (72103)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eBlack (72104)\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eAll eight colours share the same formulation, specs and print profile — pick whichever suits the part. Select your colour from the dropdown above.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003ePractical Tips\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eDry it, then keep it dry.\u003c\/strong\u003e Nylon is one of the thirstiest filaments there is — PA6-GF will pull moisture out of the air in hours, not days, and Australian coastal humidity is unforgiving. Wet nylon prints with steam popping, stringing, a rough furry surface and badly weakened layers. Dry the spool before every serious print and run it straight from a filament dryer or a sealed drybox with fresh desiccant, keeping storage humidity under 20% RH.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eDesign and finish for the fibre.\u003c\/strong\u003e Glass fibre boosts stiffness along the layer, so orient parts to put loads across the walls rather than pulling layers apart, and add extra wall loops instead of high infill for stronger functional parts. Apply a thin, even coat of glue stick to your build plate — it both improves first-layer grip and protects the plate surface. And check your nozzle: if you've been printing filled materials for a while, a worn nozzle is the usual culprit behind sudden under-extrusion.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003cdiv style=\"background:#f7f8ff;border-left:4px solid #020873;border-radius:4px;padding:18px 22px;font-family:'Open Sans',sans-serif\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/div\u003e\n","brand":"Bambu Lab","offers":[{"title":"Black (72104)","offer_id":53525443084577,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-BLACK-72104","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"Gray (72103)","offer_id":53525443117345,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-GRAY-72103","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"White (72102)","offer_id":53525443150113,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-WHITE-72102","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"Brown (72800)","offer_id":53525443182881,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-BROWN-72800","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"Lime (72500)","offer_id":53525443215649,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-LIME-72500","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"Yellow (72400)","offer_id":53525443248417,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-YELLOW-72400","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"Orange (72200)","offer_id":53525443281185,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-ORANGE-72200","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"Blue (72600)","offer_id":53525443313953,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-BLUE-72600","price":91.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/7055ec8545cb42889df01ff95cbcffbc.jpg?v=1789742583"},{"product_id":"bambu-lab-filament-paht-cf-2","title":"Bambu Lab PAHT CF","description":"\u003ch2 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003eBambu Lab PAHT-CF Filament — 1.75 mm, 1 kg\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003ePAHT-CF stands for \u003cem\u003ePolyamide High Temperature — Carbon Fibre\u003c\/em\u003e. It's a PA12 nylon base loaded with chopped carbon fibre, and it sits at the serious end of Bambu Lab's engineering range. Where standard nylon soaks up moisture from the air and turns brittle and stringy, PA12 absorbs roughly half as much — so PAHT-CF keeps its mechanical properties and dimensional stability far better in humid conditions, which matters a great deal in an Australian workshop. The carbon fibre adds stiffness and reduces warping, and the whole composite stays strong and rigid at temperatures that would leave a PLA part sagging on a shelf.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eThis is a material for functional parts rather than display pieces: drone and RC frames, jigs and fixtures that live near heat, under-bonnet and engine-bay brackets, tooling, robot arms and end effectors, gears and bushings, and replacement machine components that need to survive real loads. It's aimed at makers, small manufacturers, engineering workshops and TAFE or university labs — not a first-week beginner filament, but very approachable if you've already printed ABS or ASA successfully.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eKey Features\u003c\/h3\u003e\n\u003cp style=\"line-height:2.6\"\u003e\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eCarbon-fibre reinforced PA12\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh heat resistance\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e~50% lower water absorption than standard PA-CF\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh stiffness \u0026amp; strength\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eLow warping\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e±0.03 mm tolerance\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eAMS \u0026amp; RFID compatible\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eMatte technical finish\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eLike all Bambu Lab spools, PAHT-CF carries an RFID tag, so an X1, P1 or H2 series printer with an AMS reads the material type and colour automatically and loads the tuned profile for you — no guessing at settings for you.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003ePrint Settings\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif;line-height:1.8;padding-left:20px\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 260–300 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 100–120 °C on both Smooth PEI and Textured PEI plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e under 100 mm\/s — pushing harder hurts layer bonding on this material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling fan:\u003c\/strong\u003e 0–40% only; too much cooling will delaminate your part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle hardware:\u003c\/strong\u003e hardened steel is essential — carbon fibre will wear out a brass nozzle quickly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e strongly recommended. A stable, warm chamber keeps large parts flat and improves layer adhesion at these temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin:22px 0 12px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-family:'Open Sans',sans-serif;font-size:0.97em\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;width:45%\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003ePAHT-CF (carbon-fibre reinforced PA12 nylon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eSpool Weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 kg (filament with spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003ePrint Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e260–300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eBed Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e100–120 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e±0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDrying\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e80 °C for 8–12 h (drying oven), or 90–100 °C for 12 h on an X1 series heatbed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eColours Available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 — Black (70100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin:22px 0 12px\"\u003eAvailable Colours\u003c\/h3\u003e\n\u003cp style=\"line-height:2.4\"\u003e\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e⬤  Black (70100)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7;font-size:0.95em\"\u003ePAHT-CF is offered in a single technical black — the carbon fibre content gives it a subtle matte, slightly speckled finish that hides layer lines well on functional parts.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003ePractical Tips\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eDry it before every print, without exception.\u003c\/strong\u003e Even though PA12 absorbs less moisture than ordinary nylon, PAHT-CF is still hygroscopic and a damp spool is the single most common cause of disappointing results — you'll see popping and steam at the nozzle, furry stringing, poor layer adhesion and brittle parts. Dry at 80 °C for 8–12 hours in a filament dryer or oven, and print straight from a dry box if you can. Between prints, seal the spool in an airtight container with fresh desiccant rather than leaving it on the printer.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eSet the machine up for abrasive material first.\u003c\/strong\u003e Fit a hardened steel nozzle before you load this spool — a brass one can wear noticeably within a single large print, and a worn nozzle quietly ruins dimensional accuracy long before it fails outright. Keep the part cooling fan low, slow the first layer down, and give tall or wide parts an enclosed, draught-free chamber. Because carbon fibre makes the material stiff, avoid tight filament path bends and let the spool unwind freely.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003cdiv style=\"background:#f7f8ff;border-left:4px solid #020873;border-radius:4px;padding:18px 22px;font-family:'Open Sans',sans-serif\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/div\u003e\n","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":53525443412257,"sku":"BAMBU-LAB-FILAMENT-PAHT-CF-1","price":76.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/87306f3e061c4c0d90d7783cdc63d0cf.png?v=1789742586"},{"product_id":"bambu-lab-filament-pa6-cf-2","title":"Bambu Lab PA6 CF","description":"\u003ch2 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003eBambu Lab PA6-CF Carbon Fibre Nylon Filament — 1.75 mm, 1 kg\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003ePA6-CF is Bambu Lab's carbon-fibre reinforced Nylon 6 — the filament you reach for when a printed part has to behave like a real engineering component. Chopped carbon fibre boosts stiffness and dimensional stability while the PA6 base brings toughness, fatigue resistance and a high service temperature. It's a step up from PLA-CF or PETG: this is material for \u003cstrong\u003ejigs and fixtures, tooling, drone and RC frames, gears and bearing blocks, brackets under load, automotive and engine-bay components, and end-use functional prototypes\u003c\/strong\u003e. If you're a workshop, school engineering lab or small manufacturer printing parts that get used rather than displayed, this is the spool for the job.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003ePA6-CF is an advanced material and needs the right hardware. Run it on an \u003cstrong\u003eenclosed, high-temperature printer\u003c\/strong\u003e — Bambu Lab X1 series, P1S, P2S or H2D — fitted with a \u003cstrong\u003ehardened steel nozzle\u003c\/strong\u003e, since carbon fibre will chew through a standard brass one. A 0.6 mm nozzle gives the most reliable flow. It is not suited to open-frame, low-temperature machines.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eKey Features\u003c\/h3\u003e\n\u003cp style=\"line-height:2.4\"\u003e\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eCarbon-fibre reinforced PA6\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh stiffness \u0026amp; strength\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eExcellent wear resistance\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh heat resistance\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e±0.03 mm tolerance\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eMatte engineering finish\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eRFID spool — auto-recognised\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eAnneal for extra strength\u003c\/span\u003e\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003ePrint Settings\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif;line-height:1.8;padding-left:20px\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 260–300 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 100–120 °C (smooth or textured PEI plate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e under 100 mm\/s — slower is more reliable on tall or thin-walled parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling fan:\u003c\/strong\u003e 0–40% — keep it low so layers fuse properly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e hardened steel, 0.6 mm recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying before printing:\u003c\/strong\u003e blast drying oven at 80 °C for 8–12 h, or X1-series heatbed at 90–100 °C for 12 h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional annealing:\u003c\/strong\u003e 90–130 °C for 6–12 h to lift strength and heat resistance further\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eIf you're printing from Bambu Studio or Orca Slicer, select the built-in Bambu PA6-CF profile as your starting point — it already sets the chamber, flow and cooling behaviour for you.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-family:'Open Sans',sans-serif;font-size:0.98em\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;width:45%\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003ePA6-CF (carbon-fibre reinforced Nylon 6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eSpool Weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 kg net filament (spool included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003ePrint Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e260–300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eBed Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e100–120 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e±0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.09 g\/cm³ (ISO 1183)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eSpool Dimensions\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e200 mm diameter × 67 mm height (PC+ABS spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eRecommended Nozzle\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003eHardened steel, 0.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eColours Available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 — Black (72100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eAvailable Colours\u003c\/h3\u003e\n\u003cp style=\"line-height:2.4\"\u003e\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e\u003cspan style=\"display:inline-block;width:11px;height:11px;border-radius:50%;background:#1a1a1a;border:1px solid #020873;margin-right:8px;vertical-align:middle\"\u003e\u003c\/span\u003eBlack (72100)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7;font-size:0.95em\"\u003ePA6-CF is offered in a single engineering black with the characteristic matte, slightly speckled carbon-fibre finish — it hides layer lines well and looks the part on functional hardware.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003ePractical Tips\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eDry it, then keep it dry.\u003c\/strong\u003e Nylon is the most moisture-hungry common filament, and PA6-CF is no exception — a spool left out on the bench for a day or two in an Australian summer will print stringy, foamy and brittle with poor layer adhesion. Dry a fresh spool before its first print (80 °C for 8–12 h), then run it straight from a sealed dry box or a drying-capable AMS with desiccant. If prints suddenly turn crackly and rough, moisture is almost always the cause, not your settings.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eManage warping and wear.\u003c\/strong\u003e PA6 shrinks as it cools, so use a hot bed, keep the enclosure closed and the door shut, and add a brim on large flat footprints. Glue stick on smooth PEI both improves first-layer grip and protects the plate. And do check your nozzle before you start — printing carbon fibre through brass will erode the orifice within a spool or two and quietly ruin your dimensional accuracy.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003cdiv style=\"background:#f7f8ff;border-left:4px solid #020873;border-radius:4px;padding:18px 22px;font-family:'Open Sans',sans-serif\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/div\u003e\n","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":53525443510561,"sku":"BAMBU-LAB-FILAMENT-PA6-CF-1","price":65.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/5add05c0fb1a47b388adab5ce6248ce7.png?v=1789742588"}],"url":"https:\/\/ne3dprinting.myshopify.com\/collections\/pa.oembed","provider":"NE3D Printing","version":"1.0","type":"link"}