{"title":"Engineering \u0026 Carbon Fibre Filament","description":"\u003cp\u003eCarbon and glass fibre, nylon, PC and PPS engineering filaments for functional parts.\u003c\/p\u003e","products":[{"product_id":"bambu-lab-filament-pa6-gf-2","title":"Bambu Lab PA6 GF","description":"\u003ch2 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003eBambu Lab PA6-GF Glass-Fibre Nylon Filament — 1.75 mm, 1 kg\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003ePA6-GF is Bambu Lab's glass-fibre reinforced nylon 6 — an engineering filament for the jobs PLA and PETG quietly fail at. The chopped glass fibre dispersed through the PA6 matrix lifts stiffness and dimensional stability well above unfilled nylon while keeping nylon's standout traits: toughness, self-lubricating low friction and genuine heat resistance, with a heat deflection temperature of 186 °C. It also prints far more predictably than plain PA6, because the fibre reinforcement dramatically reduces the warping and shrinkage that make raw nylon frustrating.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eThis is the material for end-use functional parts: gears and bushings, drone and RC frames, tooling and workshop jigs, motor mounts, brackets, hinges and under-bonnet automotive components. It's well suited to enclosed printers such as the Bambu Lab X1 series, P1S, P2S and H2 series, and works on any 1.75 mm FDM printer that can reach 290 °C at the nozzle and hold a warm chamber. Because glass fibre is abrasive, a \u003cstrong\u003ehardened steel nozzle in 0.4 mm or larger is mandatory\u003c\/strong\u003e — a 0.6 mm hardened nozzle is the sweet spot for flow and part strength. Standard brass or stainless steel nozzles will wear out quickly.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:14px\"\u003eKey Features\u003c\/h3\u003e\n\u003cp style=\"line-height:2.4;font-family:'Open Sans',sans-serif\"\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eGlass-fibre reinforced PA6\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e186 °C heat deflection\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh stiffness \u0026amp; impact strength\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eLow friction, wear resistant\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eLow warp for a nylon\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e±0.03 mm tolerance\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eRFID auto-recognition\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eAMS compatible\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e8 colours\u003c\/span\u003e\n\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003ePrint Settings Guidance\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif;line-height:1.8;padding-left:20px\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 260–290 °C — start at 280 °C and tune for layer adhesion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 80–100 °C, with glue stick on a smooth PEI or engineering plate for adhesion and easy release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e up to 130 mm\/s; slower outer walls give cleaner surfaces on fibre-filled material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling:\u003c\/strong\u003e keep it low — nylon relies on slow cooling for interlayer strength. Exact fan percentage: [VERIFY]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber:\u003c\/strong\u003e enclosed printer recommended; a warm chamber reduces warping on tall parts. Recommended chamber temperature: [VERIFY]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e hardened steel, 0.4 mm minimum (0.6 mm recommended). Not suitable for brass or stainless steel nozzles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying before use:\u003c\/strong\u003e 80 °C for 8–12 hours in a blast drying oven, or 90–100 °C for 10–12 hours on a heat bed. Never exceed 100 °C — the spool can deform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-family:'Open Sans',sans-serif;font-size:0.95em\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;width:42%\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003ePA6-GF (glass-fibre reinforced nylon 6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e±0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eSpool Weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 kg (filament with spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003ePrint Temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e260–290 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eBed Temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e80–100 °C (use glue)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eMax Print Speed\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e\u0026lt; 130 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.09 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eHeat Deflection Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e186 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDrying\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e80 °C for 8–12 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eNozzle Required\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003eHardened steel, 0.4 mm or larger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eColours Available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:14px\"\u003eAvailable Colours\u003c\/h3\u003e\n\u003cp style=\"line-height:2.4;font-family:'Open Sans',sans-serif\"\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eBlue (72600)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eOrange (72200)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eYellow (72400)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eLime (72500)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eBrown (72800)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eWhite (72102)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eGray (72103)\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eBlack (72104)\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eAll eight colours share the same formulation, specs and print profile — pick whichever suits the part. Select your colour from the dropdown above.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003ePractical Tips\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eDry it, then keep it dry.\u003c\/strong\u003e Nylon is one of the thirstiest filaments there is — PA6-GF will pull moisture out of the air in hours, not days, and Australian coastal humidity is unforgiving. Wet nylon prints with steam popping, stringing, a rough furry surface and badly weakened layers. Dry the spool before every serious print and run it straight from a filament dryer or a sealed drybox with fresh desiccant, keeping storage humidity under 20% RH.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eDesign and finish for the fibre.\u003c\/strong\u003e Glass fibre boosts stiffness along the layer, so orient parts to put loads across the walls rather than pulling layers apart, and add extra wall loops instead of high infill for stronger functional parts. Apply a thin, even coat of glue stick to your build plate — it both improves first-layer grip and protects the plate surface. And check your nozzle: if you've been printing filled materials for a while, a worn nozzle is the usual culprit behind sudden under-extrusion.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003cdiv style=\"background:#f7f8ff;border-left:4px solid #020873;border-radius:4px;padding:18px 22px;font-family:'Open Sans',sans-serif\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/div\u003e\n","brand":"Bambu Lab","offers":[{"title":"Black (72104)","offer_id":53525443084577,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-BLACK-72104","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"Gray (72103)","offer_id":53525443117345,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-GRAY-72103","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"White (72102)","offer_id":53525443150113,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-WHITE-72102","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"Brown (72800)","offer_id":53525443182881,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-BROWN-72800","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"Lime (72500)","offer_id":53525443215649,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-LIME-72500","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"Yellow (72400)","offer_id":53525443248417,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-YELLOW-72400","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"Orange (72200)","offer_id":53525443281185,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-ORANGE-72200","price":91.99,"currency_code":"AUD","in_stock":true},{"title":"Blue (72600)","offer_id":53525443313953,"sku":"BAMBU-LAB-FILAMENT-PA6-GF-1-BLUE-72600","price":91.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/7055ec8545cb42889df01ff95cbcffbc.jpg?v=1789742583"},{"product_id":"bambu-lab-filament-pet-cf-2","title":"Bambu Lab PET CF","description":"\u003ch2 style=\"font-family:Poppins,sans-serif;color:#020873;margin:0 0 12px\"\u003eBambu Lab PET-CF Carbon Fibre Filament — 1.75mm, 1kg\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;color:#001A33;line-height:1.7;margin:0 0 16px\"\u003ePET-CF is Bambu Lab's carbon-fibre reinforced PET engineering filament. Chopped carbon fibre is blended into a tough PET base, which lifts stiffness, strength and heat resistance well above everyday PLA or PETG while keeping PET's low shrinkage and low warping. The result is a filament that holds its shape under load and at elevated temperatures, with a soft matte carbon finish straight off the plate.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;color:#001A33;line-height:1.7;margin:0 0 16px\"\u003eIt's aimed at makers, workshops, engineering students and small businesses printing parts that actually have to do a job: brackets, jigs and fixtures, drone and RC frames, tool mounts, automotive and under-bonnet trim pieces, robotics arms and structural housings. If you've been reaching for PETG and finding it too soft or too heat-sensitive, PET-CF is the logical step up. It runs on enclosed, high-temperature capable printers — Bambu Lab X1 series, P1 series and compatible third-party machines — and requires a hardened steel nozzle.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin:0 0 14px\"\u003eKey Features\u003c\/h3\u003e\n\u003cp style=\"line-height:2.6;margin:0 0 16px\"\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eCarbon fibre reinforced\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh stiffness \u0026amp; strength\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eExcellent heat resistance\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eLow warping \u0026amp; shrinkage\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eMatte carbon finish\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e±0.03mm tolerance\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eAMS compatible\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eAnnealable for extra strength\u003c\/span\u003e\n\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin:0 0 12px\"\u003ePrint Settings\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif;color:#001A33;line-height:1.8;margin:0 0 16px;padding-left:20px\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 260–300°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 70–100°C (80°C is a reliable starting point on smooth or textured PEI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e keep under 100 mm\/s — slower flow gives noticeably better layer bonding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling fan:\u003c\/strong\u003e 0–40% only; too much cooling weakens layer adhesion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e hardened steel required (carbon fibre is abrasive), 0.6 mm recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e recommended — a stable chamber temperature reduces warping on tall parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying before use:\u003c\/strong\u003e 80°C for 8–12 hours in a filament dryer or blast oven, or 90–100°C for 12 hours on an X1 series heatbed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional annealing:\u003c\/strong\u003e 80–140°C for 6–12 hours to further raise strength and heat resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin:0 0 12px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-family:'Open Sans',sans-serif;color:#001A33;margin:0 0 16px\"\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;width:45%\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003ePET-CF (carbon fibre reinforced PET)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e±0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eSpool Weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 kg (filament with reusable spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003ePrint Temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e260–300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eBed Temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e70–100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003ePrint Speed\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e\u0026lt; 100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003ePart Cooling Fan\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e0–40%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eRecommended Nozzle\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e0.6 mm hardened steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDrying\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e80°C for 8–12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eColours Available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 — Black (71100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin:0 0 12px\"\u003eAvailable Colours\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;color:#001A33;margin:0 0 8px\"\u003eChoose your colour from the dropdown above. Every colour shares the same specifications and print settings:\u003c\/p\u003e\n\u003cp style=\"line-height:2.6;margin:0 0 16px\"\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e\u003cspan style=\"display:inline-block;width:10px;height:10px;border-radius:50%;background:#1a1a1a;margin-right:8px;vertical-align:middle\"\u003e\u003c\/span\u003eBlack (71100)\u003c\/span\u003e\n\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin:0 0 12px\"\u003ePractical Tips\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;color:#001A33;line-height:1.7;margin:0 0 12px\"\u003e\u003cstrong\u003eDry it, then keep it dry.\u003c\/strong\u003e PET-CF absorbs moisture quickly, and wet filament is the number one cause of stringing, popping sounds during extrusion, brittle parts and poor layer adhesion. Dry a fresh spool before its first print, run it from a dryer or an AMS with fresh desiccant during long jobs, and store it sealed with desiccant between prints — particularly through a humid Australian summer.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;color:#001A33;line-height:1.7;margin:0 0 16px\"\u003e\u003cstrong\u003eSet the printer up for abrasive filament.\u003c\/strong\u003e Fit a hardened steel nozzle before your first PET-CF print — a brass nozzle will wear out fast and quietly ruin your dimensional accuracy. Keep part cooling low, print slowly on the first layer, and if a part will see real load or heat, anneal it at 80–140°C for 6–12 hours to squeeze out the last of its strength and heat resistance. Expect a small amount of shrinkage after annealing, so test-fit critical tolerances first.\u003c\/p\u003e\n\u003cdiv style=\"background:#f7f8ff;border-left:4px solid #020873;border-radius:4px;padding:18px 22px;font-family:'Open Sans',sans-serif;color:#001A33\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/div\u003e\n","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":53525443346721,"sku":"BAMBU-LAB-FILAMENT-PET-CF-1","price":68.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/a521d07865c245579b6fb02c7e6e43a2.png?v=1789742585"},{"product_id":"bambu-lab-filament-paht-cf-2","title":"Bambu Lab PAHT CF","description":"\u003ch2 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003eBambu Lab PAHT-CF Filament — 1.75 mm, 1 kg\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003ePAHT-CF stands for \u003cem\u003ePolyamide High Temperature — Carbon Fibre\u003c\/em\u003e. It's a PA12 nylon base loaded with chopped carbon fibre, and it sits at the serious end of Bambu Lab's engineering range. Where standard nylon soaks up moisture from the air and turns brittle and stringy, PA12 absorbs roughly half as much — so PAHT-CF keeps its mechanical properties and dimensional stability far better in humid conditions, which matters a great deal in an Australian workshop. The carbon fibre adds stiffness and reduces warping, and the whole composite stays strong and rigid at temperatures that would leave a PLA part sagging on a shelf.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eThis is a material for functional parts rather than display pieces: drone and RC frames, jigs and fixtures that live near heat, under-bonnet and engine-bay brackets, tooling, robot arms and end effectors, gears and bushings, and replacement machine components that need to survive real loads. It's aimed at makers, small manufacturers, engineering workshops and TAFE or university labs — not a first-week beginner filament, but very approachable if you've already printed ABS or ASA successfully.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eKey Features\u003c\/h3\u003e\n\u003cp style=\"line-height:2.6\"\u003e\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eCarbon-fibre reinforced PA12\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh heat resistance\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e~50% lower water absorption than standard PA-CF\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh stiffness \u0026amp; strength\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eLow warping\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e±0.03 mm tolerance\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eAMS \u0026amp; RFID compatible\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eMatte technical finish\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eLike all Bambu Lab spools, PAHT-CF carries an RFID tag, so an X1, P1 or H2 series printer with an AMS reads the material type and colour automatically and loads the tuned profile for you — no guessing at settings for you.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003ePrint Settings\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif;line-height:1.8;padding-left:20px\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 260–300 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 100–120 °C on both Smooth PEI and Textured PEI plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e under 100 mm\/s — pushing harder hurts layer bonding on this material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling fan:\u003c\/strong\u003e 0–40% only; too much cooling will delaminate your part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle hardware:\u003c\/strong\u003e hardened steel is essential — carbon fibre will wear out a brass nozzle quickly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e strongly recommended. A stable, warm chamber keeps large parts flat and improves layer adhesion at these temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin:22px 0 12px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-family:'Open Sans',sans-serif;font-size:0.97em\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;width:45%\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003ePAHT-CF (carbon-fibre reinforced PA12 nylon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eSpool Weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 kg (filament with spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003ePrint Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e260–300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eBed Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e100–120 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e±0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDrying\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e80 °C for 8–12 h (drying oven), or 90–100 °C for 12 h on an X1 series heatbed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eColours Available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 — Black (70100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin:22px 0 12px\"\u003eAvailable Colours\u003c\/h3\u003e\n\u003cp style=\"line-height:2.4\"\u003e\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e⬤  Black (70100)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7;font-size:0.95em\"\u003ePAHT-CF is offered in a single technical black — the carbon fibre content gives it a subtle matte, slightly speckled finish that hides layer lines well on functional parts.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003ePractical Tips\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eDry it before every print, without exception.\u003c\/strong\u003e Even though PA12 absorbs less moisture than ordinary nylon, PAHT-CF is still hygroscopic and a damp spool is the single most common cause of disappointing results — you'll see popping and steam at the nozzle, furry stringing, poor layer adhesion and brittle parts. Dry at 80 °C for 8–12 hours in a filament dryer or oven, and print straight from a dry box if you can. Between prints, seal the spool in an airtight container with fresh desiccant rather than leaving it on the printer.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eSet the machine up for abrasive material first.\u003c\/strong\u003e Fit a hardened steel nozzle before you load this spool — a brass one can wear noticeably within a single large print, and a worn nozzle quietly ruins dimensional accuracy long before it fails outright. Keep the part cooling fan low, slow the first layer down, and give tall or wide parts an enclosed, draught-free chamber. Because carbon fibre makes the material stiff, avoid tight filament path bends and let the spool unwind freely.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003cdiv style=\"background:#f7f8ff;border-left:4px solid #020873;border-radius:4px;padding:18px 22px;font-family:'Open Sans',sans-serif\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/div\u003e\n","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":53525443412257,"sku":"BAMBU-LAB-FILAMENT-PAHT-CF-1","price":76.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/87306f3e061c4c0d90d7783cdc63d0cf.png?v=1789742586"},{"product_id":"bambu-lab-filament-pa6-cf-2","title":"Bambu Lab PA6 CF","description":"\u003ch2 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:10px\"\u003eBambu Lab PA6-CF Carbon Fibre Nylon Filament — 1.75 mm, 1 kg\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003ePA6-CF is Bambu Lab's carbon-fibre reinforced Nylon 6 — the filament you reach for when a printed part has to behave like a real engineering component. Chopped carbon fibre boosts stiffness and dimensional stability while the PA6 base brings toughness, fatigue resistance and a high service temperature. It's a step up from PLA-CF or PETG: this is material for \u003cstrong\u003ejigs and fixtures, tooling, drone and RC frames, gears and bearing blocks, brackets under load, automotive and engine-bay components, and end-use functional prototypes\u003c\/strong\u003e. If you're a workshop, school engineering lab or small manufacturer printing parts that get used rather than displayed, this is the spool for the job.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003ePA6-CF is an advanced material and needs the right hardware. Run it on an \u003cstrong\u003eenclosed, high-temperature printer\u003c\/strong\u003e — Bambu Lab X1 series, P1S, P2S or H2D — fitted with a \u003cstrong\u003ehardened steel nozzle\u003c\/strong\u003e, since carbon fibre will chew through a standard brass one. A 0.6 mm nozzle gives the most reliable flow. It is not suited to open-frame, low-temperature machines.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eKey Features\u003c\/h3\u003e\n\u003cp style=\"line-height:2.4\"\u003e\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eCarbon-fibre reinforced PA6\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh stiffness \u0026amp; strength\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eExcellent wear resistance\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh heat resistance\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e±0.03 mm tolerance\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eMatte engineering finish\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eRFID spool — auto-recognised\u003c\/span\u003e \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eAnneal for extra strength\u003c\/span\u003e\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003ePrint Settings\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif;line-height:1.8;padding-left:20px\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 260–300 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 100–120 °C (smooth or textured PEI plate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e under 100 mm\/s — slower is more reliable on tall or thin-walled parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling fan:\u003c\/strong\u003e 0–40% — keep it low so layers fuse properly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e hardened steel, 0.6 mm recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying before printing:\u003c\/strong\u003e blast drying oven at 80 °C for 8–12 h, or X1-series heatbed at 90–100 °C for 12 h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional annealing:\u003c\/strong\u003e 90–130 °C for 6–12 h to lift strength and heat resistance further\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eIf you're printing from Bambu Studio or Orca Slicer, select the built-in Bambu PA6-CF profile as your starting point — it already sets the chamber, flow and cooling behaviour for you.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-family:'Open Sans',sans-serif;font-size:0.98em\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;width:45%\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003ePA6-CF (carbon-fibre reinforced Nylon 6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eSpool Weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 kg net filament (spool included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003ePrint Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e260–300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eBed Temp\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e100–120 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter Tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e±0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.09 g\/cm³ (ISO 1183)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eSpool Dimensions\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e200 mm diameter × 67 mm height (PC+ABS spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eRecommended Nozzle\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003eHardened steel, 0.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eColours Available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 — Black (72100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eAvailable Colours\u003c\/h3\u003e\n\u003cp style=\"line-height:2.4\"\u003e\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e\u003cspan style=\"display:inline-block;width:11px;height:11px;border-radius:50%;background:#1a1a1a;border:1px solid #020873;margin-right:8px;vertical-align:middle\"\u003e\u003c\/span\u003eBlack (72100)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7;font-size:0.95em\"\u003ePA6-CF is offered in a single engineering black with the characteristic matte, slightly speckled carbon-fibre finish — it hides layer lines well and looks the part on functional hardware.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003ePractical Tips\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eDry it, then keep it dry.\u003c\/strong\u003e Nylon is the most moisture-hungry common filament, and PA6-CF is no exception — a spool left out on the bench for a day or two in an Australian summer will print stringy, foamy and brittle with poor layer adhesion. Dry a fresh spool before its first print (80 °C for 8–12 h), then run it straight from a sealed dry box or a drying-capable AMS with desiccant. If prints suddenly turn crackly and rough, moisture is almost always the cause, not your settings.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eManage warping and wear.\u003c\/strong\u003e PA6 shrinks as it cools, so use a hot bed, keep the enclosure closed and the door shut, and add a brim on large flat footprints. Glue stick on smooth PEI both improves first-layer grip and protects the plate. And do check your nozzle before you start — printing carbon fibre through brass will erode the orifice within a spool or two and quietly ruin your dimensional accuracy.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003cdiv style=\"background:#f7f8ff;border-left:4px solid #020873;border-radius:4px;padding:18px 22px;font-family:'Open Sans',sans-serif\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/div\u003e\n","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":53525443510561,"sku":"BAMBU-LAB-FILAMENT-PA6-CF-1","price":65.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/5add05c0fb1a47b388adab5ce6248ce7.png?v=1789742588"},{"product_id":"bambu-lab-filament-pps-cf","title":"Bambu Lab PPS CF","description":"\u003ch2 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eBambu Lab PPS-CF Filament — 1.75 mm, 0.75 kg, Black\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003ePPS-CF sits at the very top of Bambu Lab's engineering filament range. The base polymer — polyphenylene sulfide — is a semi-crystalline high-performance thermoplastic used in automotive under-bonnet components, chemical processing equipment and electrical hardware. Bambu Lab reinforces it with chopped carbon fibre for stiffness and dimensional stability, producing a filament that stays structurally useful at temperatures where PLA, PETG and even ASA have long since deformed.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eThis is a specialist material, not an everyday one. It suits engineers, workshops, research groups and small manufacturers printing functional end-use parts: sensor housings and brackets that live near an engine or heater, jigs and fixtures exposed to solvents, insulators and connector bodies that need inherent flame retardancy, and semiconductor or laboratory tooling that must not off-gas or swell. If your part needs to be tough \u003cem\u003eand\u003c\/em\u003e hot \u003cem\u003eand\u003c\/em\u003e chemically exposed, PPS-CF is the answer — and it is delivered in a single production colour, Black (76100).\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873\"\u003eKey features\u003c\/h3\u003e\n\u003cp style=\"line-height:2.6\"\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e264°C heat deflection\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eInherently flame-retardant\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eCarbon-fibre reinforced\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eChemical \u0026amp; solvent resistant\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eVery low moisture absorption\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eExcellent dimensional stability\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eElectrically insulating\u003c\/span\u003e\u003cbr\u003e\n  \u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eMatte engineered finish\u003c\/span\u003e\n\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873\"\u003ePrinter compatibility — read this first\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003ePPS-CF needs both a very hot hotend and a heated, enclosed chamber. Bambu Lab lists it as compatible with the \u003cstrong\u003eX1E\u003c\/strong\u003e and \u003cstrong\u003eH2D\u003c\/strong\u003e only — machines with active chamber heating and a hotend rated past 300°C. It will not print successfully on a P1P, P1S, X1C, A1 or A1 mini. A \u003cstrong\u003ehardened steel nozzle is mandatory\u003c\/strong\u003e: the carbon fibre will chew through a stainless or brass nozzle quickly. Use 0.4 mm, 0.6 mm or 0.8 mm hardened; the 0.2 mm nozzle is not compatible, and 0.6 mm is the sweet spot for flow and reliability.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873\"\u003eRecommended print settings\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif;line-height:1.9;padding-left:20px\"\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eNozzle temperature:\u003c\/strong\u003e 310–340°C (hardened steel required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eBed temperature:\u003c\/strong\u003e 100–120°C — smooth or textured PEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eChamber temperature:\u003c\/strong\u003e 60–90°C, actively heated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003ePrint speed:\u003c\/strong\u003e below 100 mm\/s — slower is better for interlayer bonding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003ePart cooling fan:\u003c\/strong\u003e 0–40% — keep it low so layers fuse properly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eDrying before use:\u003c\/strong\u003e 100–140°C for 8–12 hours in a blast drying oven (or 110–120°C for 10–12 hours on an X1 heatbed, which is less effective)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873\"\u003eOptional annealing:\u003c\/strong\u003e 180–220°C for 6–12 hours to maximise crystallinity, strength and heat resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-family:'Open Sans',sans-serif;font-size:0.95em\"\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873;width:42%\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003ePPS-CF (carbon-fibre reinforced polyphenylene sulfide)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003eBambu Lab\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e± 0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eSpool weight (net)\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e0.75 kg, supplied with heat-resistant cardboard spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003ePrint temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e310–340°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eBed temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e100–120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eChamber temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e60–90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003eUp to 264°C @ 0.45 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eRequired nozzle\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003eHardened steel 0.4 \/ 0.6 \/ 0.8 mm (0.2 mm not compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003ePrinter compatibility\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003eBambu Lab X1E and H2D only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;color:#020873\"\u003eColours available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 — Black (76100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873\"\u003ePractical tips\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eDry it properly, every time.\u003c\/strong\u003e PPS-CF absorbs very little moisture compared with nylon, but the carbon fibre content still traps water and a wet spool prints with poor surface finish and weak layers. A standard filament dryer topping out at 70°C will not do the job here — you need a blast drying oven at 100–140°C. Load the spool straight from the dryer into a sealed AMS or dry box with fresh desiccant and print it the same day.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eAnneal for real-world heat performance.\u003c\/strong\u003e Straight off the printer, PPS-CF is only partly crystallised. If your part will actually see sustained high temperatures, anneal it at 180–220°C for 6–12 hours — this significantly lifts strength and heat resistance. Expect a small amount of shrinkage during annealing, so print a test part first and dial in your dimensions before committing to a final run. Keep the chamber at temperature and part cooling low throughout the print: PPS-CF is sensitive to warping, and a draught across a hot part is the fastest route to a delaminated corner.\u003c\/p\u003e\n\u003cdiv style=\"background:#f7f8ff;border-left:4px solid #020873;border-radius:4px;padding:18px 22px;font-family:'Open Sans',sans-serif;margin-top:24px\"\u003e\n  Stock held in Australia · Fast dispatch · GST-inclusive pricing\n\u003c\/div\u003e\n","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":53525443608865,"sku":"BAMBU-LAB-FILAMENT-PPS-CF","price":198.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/941e9f129f694236ac2451be67bc1df1.png?v=1789742589"},{"product_id":"bambu-lab-filament-pc-fr","title":"Bambu Lab PC FR","description":"\u003ch2 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:8px\"\u003eBambu Lab PC FR Filament — 1.75 mm, 1 kg\u003c\/h2\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003ePC FR is Bambu Lab's flame-retardant polycarbonate. Standard polycarbonate is already one of the toughest, most heat-tolerant materials you can run on a desktop printer — PC FR adds a flame-retardant package that meets the \u003cstrong\u003eUL 94-2023 V-0\u003c\/strong\u003e standard, meaning a vertically mounted test specimen self-extinguishes within 10 seconds. That combination makes it the filament to reach for when a part sits near electronics, motors, heaters or mains wiring and a PLA or PETG part simply wouldn't be appropriate.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eIt suits electrical enclosures and junction boxes, power-supply and battery housings, machine guards, light fittings, drone and RC components, jigs that live near heat sources, and functional prototypes for engineering, education and small-batch manufacturing. It's an engineering material rather than a beginner one — if you're running an enclosed printer and you're comfortable with ABS or ASA, PC FR is a logical next step.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eKey features\u003c\/h3\u003e\n\u003cp style=\"line-height:2.6\"\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eUL 94 V-0 flame retardant\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh heat resistance (~114 °C Vicat)\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eHigh impact strength\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e±0.03 mm diameter tolerance\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eAMS compatible with RFID\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003e3 colours\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eWorks with enclosed Bambu Lab machines (X1 series, P1S, P2S and similar) and any other enclosed printer that can reach 280 °C at the nozzle and 110 °C on the bed. A hardened steel nozzle is recommended — avoid soft brass-only nozzles, which wear faster with engineering materials.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003ePrint settings\u003c\/h3\u003e\n\u003cul style=\"font-family:'Open Sans',sans-serif;line-height:1.8;padding-left:20px\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 260–280 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 90–110 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber temperature:\u003c\/strong\u003e 45–60 °C — an enclosure is strongly recommended to prevent warping and cracking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling fan:\u003c\/strong\u003e 0–60% — keep cooling low for maximum layer bonding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e up to 300 mm\/s; slower perimeters give stronger, cleaner walls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetraction:\u003c\/strong\u003e 0.8–1.4 mm at 20–40 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 80 °C for 8 hours in a filament dryer or blast oven (or 90–100 °C for 12 hours on an X1-series heatbed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e hardened steel recommended; 0.4 mm or larger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eIf you're printing on a Bambu Lab machine, select the built-in Bambu PC FR profile in Bambu Studio or Orca and let the RFID tag do the work — it's the fastest path to a good first print.\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-family:'Open Sans',sans-serif;font-size:0.95em\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600;width:45%\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003ePC FR (flame-retardant polycarbonate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e±0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eSpool weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e1 kg (filament with spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003ePrint temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e260–280 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eBed temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e90–110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e≈1.18 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eFlame rating\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003eUL 94-2023 V-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eVicat softening temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e≈114 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eDrying\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e80 °C \/ 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff\"\u003e\n\u003ctd style=\"padding:10px 14px;font-weight:600\"\u003eColours available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px\"\u003e3 — Black, White, Gray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eAvailable colours\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003eAll three colours share identical specifications and print settings — pick whichever suits the job. Choose your colour from the dropdown above.\u003c\/p\u003e\n\u003cp style=\"line-height:2.6\"\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eBlack · 63100\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eWhite · 63101\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"background:#FEFFF0;border:1px solid #2B4CB9;border-radius:20px;padding:6px 16px;font-size:0.9em\"\u003eGray · 63102\u003c\/span\u003e\n\u003c\/p\u003e\n\u003chr style=\"border:none;border-top:2px solid #FCD361;margin:24px 0\"\u003e\n\u003ch3 style=\"font-family:Poppins,sans-serif;color:#020873;margin-bottom:12px\"\u003eTips from our workshop\u003c\/h3\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eDry it, then keep it dry.\u003c\/strong\u003e Polycarbonate absorbs moisture quickly — faster than most filaments — and wet PC FR prints with popping, stringing, weak layers and a brittle finish. Dry a new or shelf-stored spool at 80 °C for 8 hours before the first print, and run it straight from a dryer or an AMS with fresh desiccant. In humid coastal parts of Australia this makes the difference between a strong part and a disappointing one.\u003c\/p\u003e\n\u003cp style=\"font-family:'Open Sans',sans-serif;line-height:1.7\"\u003e\u003cstrong\u003eControl the temperature swing.\u003c\/strong\u003e PC FR shrinks as it cools, so tall or wide parts can warp or crack mid-print in an open printer. Keep the enclosure closed, keep the part cooling fan low, use a brim on large footprints and print on a clean textured PEI or engineering plate with a light glue-stick layer for release. And remember the V-0 rating describes flammability under a standard test — it doesn't make a part suitable for load-bearing or certified electrical use on its own.\u003c\/p\u003e\n\u003cdiv style=\"background:#f7f8ff;border-left:4px solid #020873;border-radius:4px;padding:18px 22px;font-family:'Open Sans',sans-serif;margin-top:24px\"\u003e\n\u003cstrong style=\"font-family:Poppins,sans-serif;color:#020873\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/strong\u003e\n\u003c\/div\u003e\n","brand":"Bambu Lab","offers":[{"title":"Gray (63102)","offer_id":53525443772705,"sku":"BAMBU-LAB-FILAMENT-PC-FR-GRAY-63102","price":83.99,"currency_code":"AUD","in_stock":true},{"title":"White (63101)","offer_id":53525443805473,"sku":"BAMBU-LAB-FILAMENT-PC-FR-WHITE-63101","price":83.99,"currency_code":"AUD","in_stock":true},{"title":"Black (63100)","offer_id":53525443838241,"sku":"BAMBU-LAB-FILAMENT-PC-FR-BLACK-63100","price":83.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/5b1907cd8c1d4ced8910fee16c3c11d7.jpg?v=1789742592"},{"product_id":"pla-carbon-fibre-ne-filament-1-75mm-1kg","title":"PLA+ Carbon Fibre NE Filament Sunlu - 1.75mm 1kg","description":"\u003ch1\u003eNE Filament PLA+ Filament: Stronger, More Precise Prints\u003c\/h1\u003e\n\u003cp\u003eAre you tired of brittle prints that lack detail and crack easily? \u003cb\u003eNE Filament PLA+ Filament\u003c\/b\u003e is the material solution designed specifically for precision and durability. It takes the familiar ease of standard \u003cb\u003ePLA\u003c\/b\u003e and dramatically boosts its performance, offering a superior alternative for all your 3D printing needs. Say goodbye to frustrating warping and hello to smooth, high-quality prints with excellent layer adhesion and exceptional toughness.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose NE Filament PLA+ Filament?\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003ePLA+ Filament\u003c\/b\u003e is not just an incremental improvement; it's a significant upgrade to your printing experience. Here are the key features that make NE Filament's blend the ideal choice:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHigh Performance and Durability:\u003c\/b\u003e Our formulation is significantly \u003cb\u003estronger and more durable\u003c\/b\u003e than generic PLA. This allows you to create functional, impact-resistant parts that last longer without snapping under stress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan class=\"citation-21\"\u003ePrecision and Smooth Prints:\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"citation-21 citation-end-21\"\u003e Experience less warping and better layer adhesion, resulting in a cleaner surface finish and higher dimensional accuracy.\u003c\/span\u003e This makes \u003cb\u003ePLA+\u003c\/b\u003e ideal for detailed models and tight-tolerance parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan class=\"citation-20\"\u003eWide Range of Applications:\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"citation-20\"\u003e From stunning artistic models and cosplay props to functional prototypes and organizational tools, Our \u003c\/span\u003e\u003cb\u003e\u003cspan class=\"citation-20\"\u003eFilament\u003c\/span\u003e\u003c\/b\u003e\u003cspan class=\"citation-20 citation-end-20\"\u003e handles it all with ease.\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eEco-Friendly 3D Printing with Our Detachable Spool System\u003c\/h2\u003e\n\u003cp\u003eAt NE Filament, we believe high performance should not come at the cost of the environment. Our \u003cb\u003ePLA+ Filament\u003c\/b\u003e features our unique \u003cb\u003edetachable spool system\u003c\/b\u003e, making sustainable 3D printing effortless.\u003c\/p\u003e\n\u003cp\u003eYou can easily refill the plastic material, dramatically \u003cb\u003ereducing plastic waste\u003c\/b\u003e from discarded spools and saving you money in the process. Print, detach, refill – it's that simple! This eco-conscious design aligns your passion for making with environmental responsibility. For more information on our sustainable efforts, please see our \u003ca href=\"https:\/\/ne3dprinting.com.au\/unlock-perfect-prints-your-ultimate-guide-to-choosing-3d-filament\/\"\u003eguide here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eKey Features to Enhance Your Prints\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVibrant and Rich Colors:\u003c\/b\u003e Choose from a wide range of vivid, eye-catching colors to bring your creative designs to life with brilliant results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeamless Compatibility:\u003c\/b\u003e Our material is thoroughly tested to ensure it works flawlessly with popular desktop 3D printers, providing consistent extrusion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUpgrade to NE Filament PLA+ Today!\u003c\/h2\u003e\n\u003cp\u003eDon't settle for the limitations of standard PLA. Upgrade to NE Filament \u003cb\u003ePLA+ Filament\u003c\/b\u003e and immediately experience the difference in strength, smoothness, and environmental design. Unlock your creative potential and achieve print quality that exceeds your expectations.\u003c\/p\u003e\n\u003cp\u003eOrder your \u003cb\u003ePLA+ Filament\u003c\/b\u003e now and transform your 3D printing results!\u003c\/p\u003e\n\u003cp\u003eNeed something printed, check out our \u003ca href=\"https:\/\/www.ne3dprinting.com.au\/\"\u003eservice bureau.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/Filaments-add-reel.png?v=1790057093\"\u003e\u003cimg class=\"wp-image-5184 size-full\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/Filaments-add-reel.png?v=1790057093\" alt=\"PLA Show casing filament detachable spool, and printed parts example in\" width=\"1181\" height=\"3449\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-4154 size-full\" title=\"PLA+\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/Ecomerce-Store.webp?v=1790057098\" alt=\"Color array of filament ABS PLA PETG\" width=\"1649\" height=\"631\"\u003e\u003c\/p\u003e","brand":"NE3D Printing","offers":[{"title":"Default Title","offer_id":53525445443873,"sku":"PLC-CF","price":41.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/Ecomerce-Store-20.png?v=1789742625"},{"product_id":"bambu-lab-pla-cf","title":"Bambu Lab PLA CF","description":"\u003ch2 style=\"font-family:Poppins, sans-serif; color:#020873; margin-bottom:12px;\"\u003eBambu Lab PLA-CF — carbon fibre stiffness, PLA simplicity\u003c\/h2\u003e\n\u003cp style=\"line-height:1.7; color:#1a1a1a;\"\u003ePLA-CF is Bambu Lab's tough PLA blend with chopped carbon fibre mixed through it. The fibres lift the stiffness and bending modulus well above plain PLA while keeping the easy, forgiving printing behaviour and dimensional stability that makes PLA the go-to for most people. The result is a filament that prints at PLA temperatures but produces parts that feel engineered rather than decorative — plus a deep matte, lightly textured surface that does a genuinely good job of hiding layer lines.\u003c\/p\u003e\n\u003cp style=\"line-height:1.7; color:#1a1a1a;\"\u003eIt suits makers and small businesses printing functional parts — brackets, jigs, mounts, drone and RC components, tool holders, bike and frame hardware — as well as schools and hobbyists who want display models and props that look finished without sanding or painting. If you have been printing PLA Basic and want more rigidity and a more premium finish without stepping up to the heat and fumes of ABS or PA, this is the natural next material.\u003c\/p\u003e\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\u003ch3 style=\"font-family:Poppins, sans-serif; color:#020873; margin-bottom:14px;\"\u003eKey features\u003c\/h3\u003e\n\u003cdiv style=\"line-height:2.6;\"\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eCarbon fibre reinforced\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eHigh bending modulus (≈3950 MPa)\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eMatte, low-sheen finish\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eMinimised layer lines\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eLow warp, easy bed adhesion\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eAMS compatible (RFID tagged)\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003ePrints up to 200 mm\/s\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003e±0.03 mm diameter tolerance\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003e6 colours\u003c\/span\u003e\n\u003c\/div\u003e\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\u003ch3 style=\"font-family:Poppins, sans-serif; color:#020873; margin-bottom:12px;\"\u003ePrint settings\u003c\/h3\u003e\n\u003cul style=\"line-height:1.9; color:#1a1a1a;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 210–240 °C (start around 220 °C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 35–45 °C — use a glue stick or PLA-friendly plate for adhesion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e up to 200 mm\/s — a 0.6 mm nozzle is the sweet spot for strength and flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart cooling:\u003c\/strong\u003e run the fan high, the same as you would for standard PLA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e hardened steel in 0.4, 0.6 or 0.8 mm. Carbon fibre is abrasive, so brass wears quickly; stainless steel is not recommended and 0.2 mm nozzles are not compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e 55 °C for 8 hours if the spool has been open a while\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"line-height:1.7; color:#1a1a1a;\"\u003eIt runs happily on Bambu Lab X1, P1 and A1 series machines — including through the AMS, where the embedded RFID tag loads the profile automatically — and on any other 1.75 mm FDM printer fitted with a hardened nozzle.\u003c\/p\u003e\n\u003ch3 style=\"font-family:Poppins, sans-serif; color:#020873; margin:24px 0 12px;\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; font-size:0.95em;\"\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873; width:45%;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003ePLA-CF (carbon fibre reinforced PLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e±0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eSpool weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e1 kg net filament\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003ePrint temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e210–240 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eBed temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e35–45 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e1.22 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eDrying\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e55 °C \/ 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eColours available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\u003ch3 style=\"font-family:Poppins, sans-serif; color:#020873; margin-bottom:14px;\"\u003eAvailable colours\u003c\/h3\u003e\n\u003cdiv style=\"line-height:2.6;\"\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eBurgundy Red (14200)\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eJeans Blue (14600)\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eLava Gray (14101)\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eMatcha Green (14500)\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eRoyal Blue (14601)\u003c\/span\u003e\n\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eIris Purple (14700)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp style=\"line-height:1.7; color:#1a1a1a; margin-top:14px;\"\u003eEvery colour shares the same specs and print profile, so you can swap between them mid-project without retuning. Select your colour above.\u003c\/p\u003e\n\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\n\u003ch3 style=\"font-family:Poppins, sans-serif; color:#020873; margin-bottom:12px;\"\u003ePractical tips\u003c\/h3\u003e\n\u003cp style=\"line-height:1.7; color:#1a1a1a;\"\u003eFit the hardened nozzle before you start. Carbon fibre is mildly abrasive and will quietly erode a brass nozzle over a few spools — you will notice it as under-extrusion and rough top surfaces long before you think to blame the nozzle. A 0.6 mm hardened nozzle is the easy-life choice: it cuts clog risk and prints faster, and the matte CF texture means you lose very little detail at the larger line width.\u003c\/p\u003e\n\u003cp style=\"line-height:1.7; color:#1a1a1a;\"\u003eKeep it dry and keep it sealed. PLA-CF absorbs moisture faster than plain PLA, and damp filament shows up as popping sounds, stringing and brittle parts. Store spools in a sealed box or bag with fresh desiccant below 20% RH, and if a spool has been sitting out, run it through a dryer at 55 °C for 8 hours before an important print. Also note that the carbon fibre reinforces stiffness rather than toughness — PLA-CF is stiffer but less flexible than standard PLA, so for parts that need to bend or absorb impact, PETG or PA are better picks.\u003c\/p\u003e\n\u003cdiv style=\"background:#f7f8ff; border-left:4px solid #020873; border-radius:4px; padding:18px 22px; margin-top:24px;\"\u003e\n\u003cp style=\"margin:0; color:#020873; font-weight:600;\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Bambu Lab","offers":[{"title":"Burgundy Red (14200)","offer_id":53666083242273,"sku":null,"price":53.99,"currency_code":"AUD","in_stock":true},{"title":"Jeans Blue (14600)","offer_id":53666083275041,"sku":null,"price":53.99,"currency_code":"AUD","in_stock":true},{"title":"Lava Gray (14101)","offer_id":53666083307809,"sku":null,"price":53.99,"currency_code":"AUD","in_stock":true},{"title":"Matcha Green (14500)","offer_id":53666083340577,"sku":null,"price":53.99,"currency_code":"AUD","in_stock":true},{"title":"Royal Blue (14601)","offer_id":53666083373345,"sku":null,"price":53.99,"currency_code":"AUD","in_stock":true},{"title":"Iris Purple (14700)","offer_id":53666083406113,"sku":null,"price":53.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/6c5ecb48a6304e16a61a49aea51e2e92.png?v=1790952114"},{"product_id":"bambu-lab-abs-gf","title":"Bambu Lab ABS GF","description":"\u003ch2 style=\"font-family:Poppins, sans-serif; color:#020873; margin:0 0 12px;\"\u003eBambu Lab ABS-GF Filament — 1.75 mm, 1 kg\u003c\/h2\u003e\u003cp style=\"line-height:1.7; color:#1a1a2e; margin:0 0 14px;\"\u003eABS-GF is Bambu Lab's glass-fibre reinforced ABS. The chopped glass fibre blended through the ABS base does three useful things at once: it stiffens the part dramatically, it cuts the shrinkage that makes plain ABS curl off the plate, and it lifts heat resistance so parts stay dimensionally stable well above what PLA or PETG can handle. The finish comes out matte rather than glossy, which hides layer lines nicely on visible parts.\u003c\/p\u003e\u003cp style=\"line-height:1.7; color:#1a1a2e; margin:0 0 14px;\"\u003eIt's a material for people printing \u003cstrong\u003ethings that have a job to do\u003c\/strong\u003e — machine brackets, jigs and fixtures, tool holders, RC and drone frames, motor mounts, electronics enclosures, automotive trim and prototype housings. Makers and small businesses reach for it when PETG flexes too much and plain ABS warps too much. Schools and workshops with an enclosed printer will find it a solid step up into engineering-grade materials, though it does ask for a bit more setup than PLA.\u003c\/p\u003e\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\u003ch3 style=\"font-family:Poppins, sans-serif; color:#020873; margin:0 0 14px;\"\u003eKey features\u003c\/h3\u003e\u003cp style=\"line-height:2.4; margin:0 0 14px;\"\u003e\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eGlass-fibre reinforced\u003c\/span\u003e  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eLow warp vs standard ABS\u003c\/span\u003e  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eHigh stiffness · 2860 MPa flexural modulus\u003c\/span\u003e  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eHeat resistant · ~99 °C HDT\u003c\/span\u003e  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eMatte engineering finish\u003c\/span\u003e  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003e±0.03 mm tolerance\u003c\/span\u003e  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003eRFID auto-recognition\u003c\/span\u003e  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003e6 colours\u003c\/span\u003e\u003c\/p\u003e\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\u003ch3 style=\"font-family:Poppins, sans-serif; color:#020873; margin:0 0 12px;\"\u003ePrinter compatibility\u003c\/h3\u003e\u003cp style=\"line-height:1.7; color:#1a1a2e; margin:0 0 14px;\"\u003eABS-GF suits any 1.75 mm FDM printer with an \u003cstrong\u003eall-metal hotend, a heated bed and — importantly — an enclosure\u003c\/strong\u003e. On Bambu Lab hardware that means the X1 series, P1 series and the enclosed H2 range; the open-frame A1 and A1 mini can run it, but you'll need to tent or enclose them to avoid layer splitting. Two things to check before you load it:\u003c\/p\u003e\u003cul style=\"line-height:1.8; color:#1a1a2e; margin:0 0 14px; padding-left:20px;\"\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873;\"\u003eUse a hardened steel nozzle.\u003c\/strong\u003e Glass fibre is abrasive and will chew through brass in a matter of spools. Stick to 0.4, 0.6 or 0.8 mm — the 0.2 mm nozzle is not compatible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873;\"\u003eAMS:\u003c\/strong\u003e works with AMS 2 Pro and AMS HT. \u003cem\u003eAMS lite is not compatible\u003c\/em\u003e with ABS-GF, so feed it directly from an external spool holder on A1-series machines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\u003ch3 style=\"font-family:Poppins, sans-serif; color:#020873; margin:0 0 12px;\"\u003eRecommended print settings\u003c\/h3\u003e\u003cul style=\"line-height:1.8; color:#1a1a2e; margin:0 0 14px; padding-left:20px;\"\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873;\"\u003eNozzle temperature:\u003c\/strong\u003e 240–280 °C (start at 260 °C and tune for layer adhesion)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873;\"\u003eBed temperature:\u003c\/strong\u003e 80–100 °C, with glue stick or a textured PEI plate for adhesion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873;\"\u003eChamber temperature:\u003c\/strong\u003e 45–60 °C — keep the enclosure shut and the chamber fan off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873;\"\u003ePrint speed:\u003c\/strong\u003e up to 180 mm\/s; slow down on tall thin parts to limit stress\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873;\"\u003ePart cooling fan:\u003c\/strong\u003e 0–80%, kept low (around 20–30%) — too much cooling is the main cause of warping and weak layer bonds in ABS-GF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#020873;\"\u003eDrying:\u003c\/strong\u003e 80 °C for 8 hours if the spool has been open a while\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"line-height:1.7; color:#1a1a2e; margin:0 0 14px; background:#FEFFF0; border-left:3px solid #FCD361; padding:12px 16px;\"\u003eBambu Lab spools carry an RFID tag, so on a compatible printer the material profile, colour and remaining weight are detected automatically — load it and print. On other printers, start from a generic ABS profile and raise the nozzle temperature a little.\u003c\/p\u003e\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\u003ch3 style=\"font-family:Poppins, sans-serif; color:#020873; margin:0 0 12px;\"\u003eSpecifications\u003c\/h3\u003e\u003ctable style=\"width:100%; border-collapse:collapse; font-size:0.95em; color:#1a1a2e;\"\u003e\u003ctbody\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873; width:45%;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003eABS-GF (glass-fibre reinforced ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e±0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eSpool weight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e1 kg (filament with spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003ePrint temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e240–280 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eBed temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e80–100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eChamber temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e45–60 °C (enclosure recommended)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eDensity\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e1.08 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eDrying\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e80 °C for 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eNozzle required\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003eHardened steel, 0.4 \/ 0.6 \/ 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f7f8ff;\"\u003e\n\u003ctd style=\"padding:10px 14px; font-weight:600; color:#020873;\"\u003eColours available\u003c\/td\u003e\n\u003ctd style=\"padding:10px 14px;\"\u003e6 — Orange, Red, White, Gray, Black, Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\u003ch3 style=\"font-family:Poppins, sans-serif; color:#020873; margin:0 0 12px;\"\u003eAvailable colours\u003c\/h3\u003e\u003cp style=\"line-height:2.4; margin:0 0 10px;\"\u003e\u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003e\u003cspan style=\"display:inline-block; width:10px; height:10px; border-radius:50%; background:#E8641C; border:1px solid #999; margin-right:7px;\"\u003e\u003c\/span\u003eOrange (41300)\u003c\/span\u003e  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003e\u003cspan style=\"display:inline-block; width:10px; height:10px; border-radius:50%; background:#C8102E; border:1px solid #999; margin-right:7px;\"\u003e\u003c\/span\u003eRed (41200)\u003c\/span\u003e  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003e\u003cspan style=\"display:inline-block; width:10px; height:10px; border-radius:50%; background:#FFFFFF; border:1px solid #999; margin-right:7px;\"\u003e\u003c\/span\u003eWhite (41100)\u003c\/span\u003e  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003e\u003cspan style=\"display:inline-block; width:10px; height:10px; border-radius:50%; background:#8A8D8F; border:1px solid #999; margin-right:7px;\"\u003e\u003c\/span\u003eGray (41102)\u003c\/span\u003e  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003e\u003cspan style=\"display:inline-block; width:10px; height:10px; border-radius:50%; background:#1A1A1A; border:1px solid #999; margin-right:7px;\"\u003e\u003c\/span\u003eBlack (41101)\u003c\/span\u003e  \u003cspan style=\"background:#FEFFF0; border:1px solid #2B4CB9; border-radius:20px; padding:6px 16px; font-size:0.9em;\"\u003e\u003cspan style=\"display:inline-block; width:10px; height:10px; border-radius:50%; background:#1F4BA8; border:1px solid #999; margin-right:7px;\"\u003e\u003c\/span\u003eBlue (41600)\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"line-height:1.7; color:#1a1a2e; margin:0 0 14px;\"\u003eEvery colour shares the same specs and print profile, so you can swap shades mid-project without re-tuning. Select your colour above before adding to cart.\u003c\/p\u003e\u003chr style=\"border:none; border-top:2px solid #FCD361; margin:24px 0;\"\u003e\u003ch3 style=\"font-family:Poppins, sans-serif; color:#020873; margin:0 0 12px;\"\u003eTips from our workshop\u003c\/h3\u003e\u003cp style=\"line-height:1.7; color:#1a1a2e; margin:0 0 14px;\"\u003e\u003cstrong style=\"color:#020873;\"\u003eKeep the heat in and the fan down.\u003c\/strong\u003e Almost every ABS-GF failure traces back to cooling — a cracked corner or a split layer halfway up a tall part means the chamber dropped too far or the part fan was running hard. Shut the enclosure, leave the chamber exhaust off, cap the part fan around 20–30%, and add a brim on anything with a small footprint. ABS-GF warps far less than plain ABS, but it isn't immune.\u003c\/p\u003e\u003cp style=\"line-height:1.7; color:#1a1a2e; margin:0 0 14px;\"\u003e\u003cstrong style=\"color:#020873;\"\u003eStore it dry, and mind the dust.\u003c\/strong\u003e ABS absorbs moisture slowly, and damp ABS-GF prints brittle with a rough, hairy surface — keep spools in a sealed box with desiccant between jobs and run an 8-hour dry at 80 °C if a spool has been sitting out. Also remember the glass fibre is abrasive: a hardened steel nozzle is not optional, and ABS gives off a noticeable odour while printing, so print in a ventilated space or use a printer with filtration.\u003c\/p\u003e\u003cdiv style=\"background:#f7f8ff; border-left:4px solid #020873; border-radius:4px; padding:18px 22px; margin-top:24px;\"\u003e\u003cp style=\"margin:0; font-family:Poppins, sans-serif; color:#020873; font-weight:600;\"\u003eStock held in Australia · Fast dispatch · GST-inclusive pricing\u003c\/p\u003e\u003c\/div\u003e","brand":"Bambu Lab","offers":[{"title":"Orange (41300)","offer_id":53666084618529,"sku":null,"price":45.99,"currency_code":"AUD","in_stock":true},{"title":"Red (41200)","offer_id":53666084651297,"sku":null,"price":45.99,"currency_code":"AUD","in_stock":true},{"title":"White (41100)","offer_id":53666084684065,"sku":null,"price":45.99,"currency_code":"AUD","in_stock":true},{"title":"Gray (41102)","offer_id":53666084716833,"sku":null,"price":45.99,"currency_code":"AUD","in_stock":true},{"title":"Black (41101)","offer_id":53666084749601,"sku":null,"price":45.99,"currency_code":"AUD","in_stock":true},{"title":"Blue (41600)","offer_id":53666084782369,"sku":null,"price":45.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/5046\/9153\/files\/b6b0fed63fc840818c36cb15ea395b12.png?v=1790952136"}],"url":"https:\/\/ne3dprinting.myshopify.com\/collections\/engineering.oembed","provider":"NE3D Printing","version":"1.0","type":"link"}